The MB-59S system designed to execute interior and exterior architectural elements requiring thermal and acoustic insulation, to be installed inside or outside, e.g. different types of windows, doors, enclosed porches, shop windows, cash boxes, show cases, etc. The structural depth of the window sections equals 50 mm for frames and 59 mm for casements. The external surfaces of these sections lie in one plane. The structural depth of the door sections both for frames and the leaves equals 50 mm. Such feature gives the effect of a uniform plane and the effect of the leaf being flush with the frame both from the external and the internal side. The MB-59S system profiles meet the thermal requirements set for the material group 2.1 according to DIN 4108.

The MB-60 is a modern aluminium system designed to execute interior and exterior architectural elements requiring thermal and acoustic barrier, e.g. a variety of windows, doors, enclosed porches, shop windows or spatial structures. The system profiles have a three-chamber structure. The structural depth of the window sections equals 60 mm (frame) and 69 mm (sash), whereas in the case of door profiles it is 60 mm and 60 mm respectively. The MB-60 system features a low value of overall heat transfer coefficient Uf due to the application of thermal breaks and gaskets. The profiles of this system comply with thermal requirements set for the material group No. 2.1 in the case of windows and 2.2 in the case of doors, as per DIN 4108.

The MB-70 is a modern aluminium system intended for realizations of exterior architectural building elements requiring the highest thermal and acoustic insulation parameters, such as: various types of windows, doors, enclosed porches, display windows or spatial structures. The system profiles have a three-chamber structure. The structural depth of the window sections equals 70 mm (frame) and 79 mm (sash), and for doors: 70 mm and 70 mm respectively. The MB-70 system features an exceptionally low value of the overall heat transfer coefficient Uf due to the application of thermal breaks and gaskets. It is of significant importance in the times of increasing demands placed on energy management and environmental protection. Profiles of this system comply with thermal requirements set for the material group No. 1 in case of windows (the highest level of thermal insulation performance for aluminium windows) and 2.1 in case of doors, as per DIN 4108.

The MB-45 is a modern aluminium system intended for designing elements of architectural exterior and interior enclosures that do not require thermal insulation, e.g. a variety of partition walls, windows, doors – including hand-operated and automatic sliding doors, swing doors, enclosed entrances, shop windows, cash boxes, show cases or spatial structures. The structural depth of the window sections equals 45 mm (frame), 54 mm (sash), and of the door: 45 mm and 45 mm, respectively.

The MB - 23P is an aluminium system intended for glazing balconies. Windows sliding horizontally are the backbone of the MB-23P system The windows based on this system protect the balcony normally open space against unfavourable weather conditions such as wind, rain, snow as well as dirt and noise. At the same time, the MB-23P system structures hinder burglaries, which is particularly essential for ground floor apartments. The structural depth of sections equals 53 mm (frame) and 23 mm (sash). Each construction built in the MB-23P system, due to its external installation, has been equipped with an efficient system of ventilation and water draining from the pane chamber and a chamber between the sash and the frame. The system can be used both in the case of existing balconies, as well as the ones to be added. It can be applied not only in balconies of simple design. Thanks to the application of the MB-45 window/door profile system it is possible to create angular connections between the individual windows which are adjustable within a wide opening range.

It is a modern system designed to fabricate outward opening awning windows as well as outward opening casement windows – economical, yet featuring very good functional qualities.

It is a modern construction designed for fabricating economical and functional windows requiring thermal and acoustic insulation and having vertical or horizontal axis of rotation.